Scooter Bars, Forks & Clamps (Compatibility)
Applies to Ethic Product Types: Scooter Bars, Scooter Clamps, Scooter Forks, Scooter Headset.
Pro Scooter Compatibility: Unlike apparel, pro scooter parts are sized by exact millimeter diameters and compression systems. You must match your bars, fork, and clamp to the same standard.
| Standard | Bar Outer Diameter (OD) | Bar Inner Diameter (ID) | Compatible Compression |
|---|---|---|---|
| Standard | 1 1/4" (31.8mm) | Standard (requires a slit for HIC/ICS) | ICS, Standard SCS, HIC (with shim) |
| Oversized | 1 3/8" (34.9mm) | Oversized (no slit needed for SCS) | SCS (Oversized), HIC |
| IHC (Integrated) | 1 1/4" (31.8mm) | Thick-walled (no slit) | IHC specific forks and clamps |
Scooter Decks, Wheels & Pegs
Applies to Ethic Product Types: Scooter Decks, Scooter Grips, Scooter Pegs, Scooter Wheels.
| Item Category | Sizing / Dimension Notes |
|---|---|
| Scooter Decks | Sized by Length x Width (e.g., 4.8" x 19.5" to 5.5" x 22"). Wider/longer decks offer more stability for park; shorter decks are for street technical tricks. |
| Wheels | Sized by diameter (100mm, 110mm, 120mm) and width (24mm, 30mm). Ensure your fork and deck have clearance for the wheel diameter. |
| Pegs | Standard 4.5" length. Ensure axle size matches (typically 8mm for standard axles or 12mm for peg-ready axles). |
| Grips | Standard 160mm to 170mm length. Fits all standard 22mm inner diameter scooter handlebars. |