Shop Supplies and Parts are not included unless stated.
E-Bikes are an extra $30*
E-Bikes are an extra $30*
| Nomads 1 Year Complementary | Bronze Tune | Silver Tune-up Everything part of Bronze plus: |
Gold Tune-up Everything part of Silver plus: |
|---|---|---|---|
| Drivetrain: Adjust derailleur limits, cable tension, and derailleur alignment (front and rear). Inspect and realign the derailleur hanger | Clean: Wipe down the frame, wheels, and key components to remove dirt and debris. | Clean: Detailed wash and wipe of the entire bicycle, including wheels and components. | Clean: Bike and components are taken apart for detailed cleaning and degreasing, followed by lubrication and careful reassembly. |
| Brakes: Balance cable tension so both levers feel even. Align pads (height, angle, toe-in) and center on rim. Adjust disc calipers for proper rotor clearance and true rotor if needed. Includes one brake bleed if required. Cables and housing extra. | Brakes: Balance cable tension so both levers feel even. Align pads (height, angle, toe-in) and center on rim. Adjust disc calipers for proper rotor clearance and true rotor if needed. Includes one brake bleed if required. Cables and housing extra. | Brakes: Pad and rotor bed-in performed. | Brakes: Includes brake bleed/cable and housing replacement. |
| Tires: Inflate tires to the maximum rated pressure. (Flat repair not included) | Tires: Service includes one flat repair or tire installation and inflating tires to the proper pressure. (Hub-motor e-bike wheels not included.) | Tires: Service covers repairing or installing tires on both wheels. (Additional cost for hub-motor e-bike wheels.) | Tires: Labour included for tubeless tire setup. (Parts and sealant not included.) |
| Wheels: Inspect and adjust hub bearings, true both wheels if needed, and ensure axle nuts or quick-release skewers are properly secured. | Wheels: Secure axle nuts/or skewers. | Wheels: Tune hub bearings, correct wheel alignment for roundness and side-to-side accuracy, and evaluate or adjust spoke tension. (Spoke replacement additional.) | Wheels: Overhaul hub components with cleaning, inspection, fresh grease, and installation of new bearings where applicable, followed by adjustment. |
| General: Ensure proper adjustment and tightness of the stem, handlebar, saddle, controls, seatpost, pedals, and crankarms. | Drivetrain: Adjust derailleur limits, cable tension, and derailleur alignment. Realign hanger | Drivetrain: Clean the drivetrain externally, add fresh lubrication, and dial in the shifting. | Drivetrain: Strip down and deep-clean the drivetrain, inspect parts for wear, apply fresh lubrication, then reinstall and tune shifting. (New shift cables and housing included.) |
| Lubricate: Drivetrain components and derailleur pivots. | Frame: Clean and inspect frame, dropouts and fork for fatigue or damage. | Frame: Clean and inspect frame, dropouts and fork for fatigue or damage. | Frame: Covers labour required to service and replace frame pivot bearings. (Replacement parts not included.) |
| — | General: Check/adjust/tighten; stem, handlebar, seat, controls, seat post, pedals, and crankarms. | Headset: Check and adjust headset bearings as needed. | Headset: Clean and inspect headset components, grease, and reinstall. Loose bearings included. |
| — | Lubricate: Lubricate drivetrain components and derailleur pivot areas for smooth operation. | BB/Cranks: Check bottom bracket adjustment and confirm crank arms are secure and properly set. (Replacement extra) | Dropper Posts: Service cable-actuated dropper post with new cable and housing, and apply fresh grease. |
| — | — | Installations: Labour included for installing most common parts and accessories, including chains, cassettes, brake pads, cables and housing, tires and tubes, grips, and handlebars or stems. | Suspension: Labour for fork lower service and rear shock overhaul included. (Parts and sourcing extra.) |
Contact or Call us Today: (403) 887-2218
